The revolutionary Premier Range of Infrared Gas Sensors contain all the optics, electronics and firmware for the sensor to give out a linearized, temperature-compensated output.
Features
Instantly converts existing pellistor-based instruments
to infrared.
Can be programmed either as a direct pellistor
replacement or with an industry standard output.
New instruments can be designed for direct digital
communications with the sensor using the protocol supplied.
Provides a fast track route to introduce the latest
infrared technology - without any specialist knowledge - for Hydrocarbon and, Carbon Dioxide sensors.
Benefits
This totally new approach means that, with the correct certification, Original Equipment Manufacturers:-
Are able to directly fit these sensors into compatible
portable and fixed gas detectors to convert them from pellistor to infrared.
Can benefit from large savings on design costs because any instrument suitable to accept pellistors can utilise the new range of IR sensors.
Can purchase the sensors at competitive prices.
Available Types
Certified TypesTemperature Compensated -20 to +50 deg. C |
 |
 |
|
| Sensor Type | Gas Types | Measurement Ranges | Technical Data Sheet |
| MSH-P-HC / x | Hydrocarbons including Methane |
0 - 5% Vol. Methane 0 - 100% Vol. Methane 0 - 2% Vol.Propane 0 - 2% Vol.Propylene 0 - 3% Vol. ETO |
TDS0034 TDS0048 |
| MSH-P-HHC / x | Propane | 0 - 5% Vol. up to 0-100% Volume |
TDS0060 |
| MSH-P-CO2 / x | Carbon Dioxide | 0 -500ppm up to 0-5% Volume |
TDS0036 TDS0048 TDS0057 |
| MSH-P-HCO2 / x | Carbon Dioxide | 0 -10% up to 0-100% Volume |
TDS0054 |
Non-Certified TypesTemperature Compensated -20 to +50 deg. C |
 |
 |
|
| Sensor Type | Gas Types | Measurement Ranges | Technical Data Sheet |
| MSH-P-HC / NC / x | Hydrocarbons including Methane |
0 - 5% Vol. Methane 0 - 100% Vol. Methane 0 - 2% Vol.Propane 0 - 2% Vol.Propylene 0 - 3% Vol. ETO |
TDS0035 TDS0048 |
| MSH-P-HHC / NC / x | Propane | 0 - 5% Vol. up to 0-100% Volume |
TDS0061 |
| MSH-P-CO2 / NC / x | Carbon Dioxide | 0 -500ppm up to 0-5% Volume |
TDS0037 TDS0048 TDS0058 |
| MSH-P-HCO2 / NC / x | Carbon Dioxide | 0 -10% up to 0-100% Volume |
TDS0055 |
'x' denotes number of pins, i.e.
3 - for Hydrocarbon or Carbon Dioxide
sensors configured to directly replace existing pellistors.
5 - for Multi Purpose sensors.
Configuration Unit
The Premier Sensor Configuration unit enables users to customise certain parameters within the Premier sensor in order to suit their particular requirements. The unit is supplied complete with a PC software configuration package. Versions of the unit are available for either positive or negative supply sensors. Ordering details are as follows:
Positive version - Type P/CONFIG/POS
Negative version - Type P/CONFIG/NEG